EN 10083-2: 06 standard
W.NR.: 1.1149
Non-alloy special steel
heat analysis according to the EN 10083-2: 06 standard
| C % | Si % | Mn % | P % | S % | Cr % | Ni % | Mo % | Cr+Mo+Ni % | |
| From | 0,17 | – | 0,40 | – | 0,020 | – | – | – | – |
| To | 0,24 | 0,40 | 0,70 | 0,030 | 0,040 | 0,40 | 0,40 | 0,10 | 0,63 |
there aren’t any indications for drawn products +C
* Delivery condition: as rolled.
Semi-hard, tough carbon-steel, easily machinable by cold-strain.
Weldability:
Easily weldable.
Hardenability:
Extremely low hardenability, used above all for pieces of small section and when deformations due to water-quenching are allowed.
Notes:
CORRESPONDENCE WITH OTHER STANDARDS (purely as an indication):
| DIN 17200 | AFNOR 35-551 |
| Cm22 | XC18u |