EN 10277-2:2008 standard
W.NR.: 1.0543
Non-alloy steel for structural purposes
heat analysis according to the EN 10277-2:2008 standard
| C % | Si % | Mn % | P % | S % | N % | Cu % | |
| From | – | – | – | – | – | – | – |
| To | – | – | – | 0,045 | 0,045 | 0,012 | – |
according to the EN 10277-2:2008 standard
| Thickness mm | Rolled + peeled rolled ( +SH ) |
Cold drawn | |||
| ( +C ) | |||||
| hardness HB | Rm (MPa) | Rp0,2 minimum | Rm (MPa) | A5 % | |
| (MPa) | minimum | ||||
| ≥5≤10 | 540 | da 700 a 1050 | 5 | ||
| >10≤16 | 480 | da 680 a 970 | 6 | ||
| >16≤40 | da 169 a 211 | da 570 a 710 | 390 | da 640 a 930 | 7 |
| >40≤63 | da 169 a 211 | da 570 a 710 | 340 | da 620 a 870 | 8 |
| >63≤100 | da 169 a 211 | da 570 a 710 | 295 | da 570 a 810 | 8 |
* Delivery condition: as rolled.
Weldability:
Failing any prescriptions concerning chemical composition, no technical data about this steel weldability are available.
Notes:
CORRESPONDENCE WITH OTHER STANDARDS (purely as an indication):
| EN 10025-2:2019 | EN 10025:90 | UNI 7070 | DIN 17 100 | NF A35-501 |
| E335 | Fe 590-2 | Fe 590 | St 60-2 | A 60-2 |