Cold drawn standards EN 10277:2018 W.NR.: 1.7139 Special alloy case-hardening steel CHEMICAL COMPOSITION MECHANICAL FEATURES PROPERTIES Heat analysis according to the EN ISO 683-3:2022 standard C % Si % Mn % P % S % Cr % Cu % From 0,14 – 1,00 – 0,020 0,80 – To 0,19 0,40 1,30 0,025 0,040 1,10 0,40 According to the EN 10277:2018 standard Thickness mm Soft annealed* + peeled rolled (+A +SH ) Soft annealed* + cold drawn ( +A+C ) Hardness maximum values HB Hardness maximum values HB ≥5≤10 – 260 >10≤16 – 250 >16≤40 207 245 >40≤63 207 240 >63≤100 207 240 * Delivery condition: subjected to a softening treatment according to the maximum hardness prescription. Improved machinability: Upon request it can be supplied with improved machinability with Pb (lead) addition, for example Pb=0,15%÷0,35% Weldability: It is a MnCr alloy steel, easily hot machinable and weldable. Hardenability: It has a low hardenability and therefore it can show good core features till thicknesses of about 20 mm. Notes: CORRESPONDENCE WITH OTHER STANDARDS (purely as an indication): UNI 7846 EN 10084 DIN 17210 EN 10277-4:08 AFNOR 35-551 16MnCr5 16MnCrS5 16MnCrS5 16MnCrS5 16MC5 16MnCrS5-EN.pdf (PDF, opens in a new window)